Professional Mold & Mildew Removal for Richmond Homeowners
The siding on your home is the first thing people see, and it’s the first surface to show signs of mold, mildew, and dirt buildup. Jacobson’s Power Washing provides siding cleaning services that remove what’s growing on your home’s exterior and protect the material underneath. We use methods matched to your siding type so the job gets done safely and the results hold up.
Locally owned
Residential power washing
Fast & affordable service
Your home’s siding sits between your living space and everything the outdoors throws at it. Rain, humidity, pollen, dirt, and organic growth all land on that surface and stay there. Over time, what starts as a light film of dust turns into layers of grime, mold staining, and mildew growth that change the way your home looks and affect the condition of the material.
Siding cleaning is the process of removing all of that buildup to restore the appearance and protect the surface. It’s not just about aesthetics. Mold and mildew are living organisms that feed on moisture and break down the materials they attach to. Leaving them in place leads to discoloration, surface degradation, and in some cases, damage that requires replacement.
Richmond’s climate is a contributor to siding problems. Summers are hot and humid, which creates the exact conditions mold and mildew need to grow. Pollen season coats everything in a layer of yellow-green dust every spring. Trees and shade keep certain walls damp well into the day, giving algae a head start. And because these conditions repeat year after year, the buildup compounds if it’s not addressed.
North-facing and east-facing walls tend to be the worst because they get the least direct sunlight. These are the surfaces where mold, mildew, and algae establish themselves first and spread outward.
Not all siding can handle the same cleaning method. High-pressure washing works on hard surfaces like concrete and brick, but it causes problems on siding materials. Vinyl cracks under too much pressure. Wood splinters and loses its grain. Painted surfaces peel. Stucco chips and flakes.
Soft wash siding cleaning uses low-pressure water combined with a cleaning solution that targets mold, mildew, algae, and bacteria at the source. The solution does the work, not the water force. It gets applied, sits on the surface long enough to break down the growth, and then gets rinsed away gently. The siding gets clean without taking damage.
A pressure washer from the hardware store doesn’t come with instructions on how to clean each type of siding safely. Most homeowners don’t know what PSI to use on vinyl versus wood versus fiber cement. And the consequences of getting it wrong show up fast: cracked panels, water forced behind the siding, stripped paint, and splintered wood.
Professional siding cleaning services take the risk out of the equation. The crew knows the material, adjusts the method accordingly, and uses cleaning agents that are rated for the specific type of growth on the surface.
Getting your siding cleaned on a regular schedule does more than make the house look better. There are long-term benefits that affect the condition of your home and the cost of maintaining it.
Safe, Effective, Professional results every time
We follow the same process on every job so the results are consistent and the siding stays protected.
Before we start, we look at what type of siding your home has, the condition it’s in, and the kind of buildup we’re dealing with. We check for cracked panels, loose trim, gaps around windows, and any areas that need a more careful approach.
We apply a cleaning solution formulated to break down mold, mildew, algae, and dirt. The solution is applied at low pressure and left on the surface for a set dwell time. This gives it time to penetrate the buildup and kill organic growth at the root, not just on the surface.
Once the cleaning solution has done its work, we rinse the siding at low pressure. This removes the buildup along with the cleaning agent, leaving a clean surface without the risk of cracking, warping, or water intrusion.
We walk the entire perimeter of the home after the wash is complete. Every section of siding is checked for spots that may need additional treatment. We handle anything that didn’t come clean on the first pass, and we make sure the surrounding area is left the way we found it.
Every siding material responds differently to cleaning, and we adjust our approach based on what’s on your home.
Safe, Effective, Professional results every time
We clean siding for homeowners across Richmond who want the job handled the right way. Every home gets the same standard of care regardless of size or siding type.
Richmond homeowners deal with siding buildup that’s driven by the local climate. The combination of humidity, heat, pollen, and shade creates conditions that feed mold, mildew, and algae growth on exterior surfaces throughout the year. Homes near trees or with walls that don’t get direct sunlight are the most affected, but no home in this area is immune to it.
Jacobson’s Power Washing provides residential siding cleaning services throughout Richmond, VA and the surrounding communities. We work in neighborhoods across the metro, from Midlothian to Glen Allen, Short Pump to the Fan District, and everywhere in between. Our focus is residential, and our methods are built around the specific exterior home cleaning challenges that Richmond properties face.
If your siding has started to change color, show streaks, or develop patches of green or black, that’s buildup that needs to come off. We’re here to handle it.
Trusted by homeowners and renters across Midlothian, VA.
Highly impressed with the professionalism! They cleaned our wooden deck and perimeter fence, removing years of grime without any wood damage. It looks freshly stained again. Very reliable and easy to communicate with.
Jacobson’s did an incredible job on our vinyl siding. The green mold and dirt are completely gone, and the house literally sparkles. Fast service and very honest pricing. I won’t go anywhere else for exterior cleaning.
Our driveway had terrible oil stains and dark patches. After one visit from the team, the concrete looks brand new. They were punctual, professional, and did exactly what they promised. Great local service!
Once a year is a good starting point for most homes in the Richmond area. If your home has walls that stay shaded for most of the day, sits near trees, or has had visible mold and mildew growth in the past, you may benefit from cleaning twice a year. Staying on a regular schedule keeps buildup from getting ahead of you.
Yes. Soft washing was designed for surfaces that can’t handle high pressure. It relies on a cleaning solution to break down mold, mildew, and algae instead of using water force. Vinyl, wood, fiber cement, stucco, and painted siding are all safe to clean with this method when it’s done correctly.
In most cases, yes. The cleaning solution used in soft washing kills mold and mildew at the root, not just the surface layer. This means the growth is eliminated, not just rinsed off. Results last longer than a high-pressure rinse because the organisms are treated rather than displaced. Some deep staining on older surfaces may lighten rather than disappear entirely, but the mold itself is removed.
Most residential siding cleaning jobs take between two and four hours. The time depends on the size of the home, the number of stories, and the amount of buildup on the surfaces. Homes with heavy mold or algae growth may take longer due to additional dwell time for the cleaning solution.
Mold, mildew, and dirt buildup don’t have to define the way your home looks. Jacobson’s Power Washing provides siding cleaning services that get your home’s exterior back to the condition it should be in, using methods that protect the material and deliver results that last.
Call us today or request a quote online. We’ll take care of the rest.