Restore & Protect Your Home's Exterior Surfaces
Locally owned
Residential power washing
Fast & affordable service
Exterior surface cleaning is the process of washing the outside surfaces of your home and property to remove dirt, mold, mildew, algae, pollen, and general buildup. It covers everything from the siding on your house to the concrete in your driveway to the fence along your property line. Each surface has different needs, and the way it gets cleaned should reflect that.
Wood, vinyl, stucco, brick, concrete, and composite materials all respond differently to water pressure and cleaning agents. Vinyl cracks under too much force. Wood splinters and loses its grain. Stucco chips and flakes. Concrete can handle higher pressure, but older or damaged concrete needs a lighter touch. A one-size-fits-all approach doesn’t work when the goal is to clean without causing damage.
That’s the core of what professional exterior surface cleaning provides. The crew evaluates each surface, selects the right method and pressure level, applies the appropriate cleaning solution, and washes everything in a way that removes the buildup without putting the material at risk.
Homeowners who try to handle exterior cleaning on their own often run into the same set of problems. The pressure washer they rent doesn’t have the control needed for sensitive surfaces. They use the same PSI on the siding as they do on the driveway. They skip the pre-treatment step and end up pushing mold around instead of killing it. And the results are uneven, with clean spots next to sections that barely look different.
Professional residential exterior cleaning takes those variables off the table. The equipment is built for this work, the crew knows how each material responds, and the cleaning agents are rated for the specific type of growth and staining on the surface. You get a full, even clean across every surface on the property.
There are practical reasons to keep the outside of your home clean, and most of them go beyond appearance. Regular exterior surface cleaning protects your property in ways that save money and prevent bigger problems down the road.
Safe, Effective, Professional results every time
We approach every property with the same process to make sure nothing gets missed and every surface gets the treatment it needs.
We start by walking the property and evaluating each surface. We note the materials, the condition, the type of buildup, and any areas that need a more careful approach. Cracked siding, older mortar, weathered wood, and damaged paint are all identified before any cleaning starts.
For surfaces with mold, mildew, algae, or staining, we apply a cleaning solution before the pressure wash. The product is selected based on the surface material and the type of growth present. It sits on the surface for a set dwell time to break down organic matter and loosen embedded dirt.
Each surface is cleaned using the method that fits the material. Siding, wood, stucco, and painted surfaces get a soft wash at low pressure. Concrete, brick, and stone get a higher-pressure wash adjusted for their condition. Surface cleaners are used on flat areas like driveways and patios for even, streak-free results.
After the wash is complete, we walk the property again to check every surface. Any spots that need a second pass get treated on the spot. We don’t consider the job done until everything is clean and you’re satisfied with the results.
We handle every type of exterior surface found on residential properties and adjust our approach based on the material.
Safe, Effective, Professional results every time
Jacobson’s Power Washing provides residential exterior cleaning for homeowners across Richmond who want every surface on their property handled the right way.
Richmond’s weather creates a cycle that puts exterior surfaces through a lot every year. The humidity that builds from late spring through summer feeds mold, mildew, and algae on every surface that holds moisture. Pollen coats homes, fences, and driveways every spring. Fall brings leaves that trap moisture against decks and walkways. And winter rain and cold cause expansion and contraction in concrete, wood, and mortar that speeds up wear.
These conditions don’t affect every property equally. Homes surrounded by trees deal with more shade and more organic growth. Properties in low-lying areas or near water hold more ground moisture. North-facing walls stay damp longer than those that get direct sunlight. But every home in the Richmond area benefits from regular exterior surface cleaning to address what the climate puts on its surfaces year after year.
Jacobson’s Power Washing provides residential exterior cleaning throughout Richmond, VA and surrounding communities, including Midlothian, Glen Allen, Short Pump, and neighborhoods across the metro. We know what Richmond properties deal with, and we clean with that in mind.
Trusted by homeowners and renters across Midlothian, VA.
Highly impressed with the professionalism! They cleaned our wooden deck and perimeter fence, removing years of grime without any wood damage. It looks freshly stained again. Very reliable and easy to communicate with.
Jacobson’s did an incredible job on our vinyl siding. The green mold and dirt are completely gone, and the house literally sparkles. Fast service and very honest pricing. I won’t go anywhere else for exterior cleaning.
Our driveway had terrible oil stains and dark patches. After one visit from the team, the concrete looks brand new. They were punctual, professional, and did exactly what they promised. Great local service!
Once a year is a good schedule for most homes. Surfaces that stay shaded, sit under trees, or are prone to mold and algae may benefit from twice-a-year cleaning. Driveways and walkways with heavy use or staining can also benefit from more frequent attention. A consistent annual cleaning keeps buildup from compounding and makes each visit more efficient.
Yes, when the right method is used. Wood and vinyl both need a low-pressure approach. High-pressure washing can crack vinyl, splinter wood, and force water behind siding. Soft washing, which uses a cleaning solution at low pressure, is the standard method for these materials. It gets the surface clean without causing damage.
It can if the wrong pressure level or technique is used on the wrong surface. That’s why professional cleaning matters. We evaluate every surface before we start and match the pressure, nozzle, and cleaning method to the material. Sensitive surfaces like siding, wood, and stucco get soft washed. Hard surfaces like concrete and brick get pressure washed at the appropriate PSI. The goal is always a thorough clean with no damage.
The outside of your home doesn’t have to look worn down, stained, or covered in buildup. Jacobson’s Power Washing provides exterior surface cleaning services that cover every part of your property, using methods that protect the materials and deliver results you can see right away.
Call us today or request a quote online. We’ll take it from there.