Professional Deck & Fence Power Washing for Richmond Homeowners
Locally owned
Residential power washing
Fast & affordable service
Decks and fences are some of the most exposed structures on a residential property. They sit outside year-round, taking on rain, humidity, sun, pollen, and whatever else the seasons deliver. And because most decks and fences are made of wood or wood-composite materials, they’re more vulnerable to that exposure than something like concrete or brick.
Over time, dirt settles into the grain of the wood. Mold and mildew grow in areas that stay damp or shaded. Algae coats flat surfaces like deck boards and fence rails. The wood loses its color and starts to look gray, worn, and neglected. None of this reverses on its own. It keeps getting worse until the surface is cleaned.
The most common problems homeowners notice are discoloration, green or black growth on the surface, soft spots in the wood, and a general appearance that doesn’t match the rest of the property. In Richmond’s climate, these issues show up faster than in drier regions because the humidity gives mold and algae exactly what they need to thrive.
Fences tend to be worse than decks because they’re often overlooked during routine maintenance. Privacy fences with tightly spaced boards are especially prone to mold because air doesn’t circulate well between the panels. Moisture gets trapped, and growth takes hold fast.
A pressure washer from the hardware store can clean a deck or fence, but without the right settings, it can also destroy one. Wood fibers splinter and tear under too much pressure. The grain lifts, the surface becomes rough, and the damage is visible every time you walk across it or look at it from the yard.
Professional deck power washing and fence power washing use controlled pressure levels and the right nozzle tips to clean the surface without tearing into the material. A cleaning solution is applied to treat the mold and algae before the pressure wash, which means less force is needed to get the surface clean. The result is a thorough wash that removes everything without leaving damage behind.
Getting your deck and fence cleaned does more than make them look better. There are practical reasons to keep up with it, and all of them come back to protecting the structure and getting more years out of it.
Safe, Effective, Professional results every time
We follow the same process on every deck and fence job so the results are consistent and the material stays protected.
Before we start, we look at the type of material, its age, its condition, and the kind of buildup we’re dealing with. We check for soft spots, loose boards, damaged posts, and any areas that need a more careful approach. This tells us what pressure level and cleaning method to use.
We apply a cleaning solution to the surface that’s formulated to break down mold, mildew, algae, and dirt. The solution sits for a set dwell time so it can work its way into the grain and treat the growth at the source. For heavy staining or areas with concentrated buildup, we may apply a second treatment before washing.
Once the cleaning solution has done its work, we wash the surface at a pressure level that’s safe for the material. Wood gets a controlled, low-pressure wash that removes buildup without lifting the grain or splintering the fibers. Composite and vinyl materials are handled with their own settings based on manufacturer recommendations.
After the wash, we rinse the entire surface and walk the area to check every section. If anything needs a second pass, we handle it on the spot. We look for any areas where the cleaning solution didn’t fully break down the buildup and treat those before finishing.
Not every deck and fence is the same, and the cleaning approach changes based on the material, age, and condition of the structure.
We adjust pressure levels, nozzle types, and cleaning agents based on the material and age of the structure. Older wood with existing wear gets a lighter approach. Newer materials in good condition can handle a more direct cleaning.
We clean decks and fences for homeowners across Richmond who expect the work done correctly and the materials treated with care.
Richmond’s climate puts decks and fences through a cycle that repeats every year. Summers bring heat and humidity that feed mold and algae on wood surfaces. Spring covers everything in pollen. Fall leaves sit on deck boards and against fence panels, trapping moisture underneath. Winter brings freezing temperatures that cause moisture in the wood to expand and contract, weakening the grain over time.
All of this adds up. A deck or fence that looked good a few years ago can start to look gray, stained, and worn without regular cleaning. And in Richmond, the timeline from clean to covered in buildup is shorter than in drier parts of the country.
Jacobson’s Power Washing provides residential deck cleaning and fence cleaning services throughout Richmond, VA and the surrounding communities. We work in neighborhoods from Midlothian to Glen Allen, Short Pump to the Fan District, helping homeowners keep their outdoor structures clean, safe, and well-maintained through every season.
Trusted by homeowners and renters across Midlothian, VA.
Highly impressed with the professionalism! They cleaned our wooden deck and perimeter fence, removing years of grime without any wood damage. It looks freshly stained again. Very reliable and easy to communicate with.
Jacobson’s did an incredible job on our vinyl siding. The green mold and dirt are completely gone, and the house literally sparkles. Fast service and very honest pricing. I won’t go anywhere else for exterior cleaning.
Our driveway had terrible oil stains and dark patches. After one visit from the team, the concrete looks brand new. They were punctual, professional, and did exactly what they promised. Great local service!
Once a year is a good baseline for most decks and fences in the Richmond area. Structures that sit under heavy tree cover, stay shaded for most of the day, or have a history of mold and algae growth may benefit from cleaning twice a year. If you plan to stain or seal the wood, cleaning should happen first so the product absorbs properly.
Not when it’s done at the right pressure. Wood needs a controlled, low-pressure wash to avoid grain damage, splintering, and surface roughness. We set our equipment based on the type and condition of the wood so the surface gets clean without getting torn up. That’s the main difference between a professional wash and a DIY attempt with a rented machine.
Yes. Mold, mildew, and algae break down wood over time. Removing them on a regular basis slows that process and keeps the material in better condition for longer. Decks and fences that get cleaned and maintained consistently last years longer than those that don’t.
In most cases, yes. The gray, worn appearance on weathered wood is a combination of UV damage, dirt, and organic growth sitting on the surface. Our cleaning process removes those layers and brings back the original color of the wood underneath. Deep weathering on very old wood may not come all the way back, but the improvement is still noticeable.
A worn, dirty deck or fence doesn’t have to stay that way. Jacobson’s Power Washing provides deck cleaning services and fence cleaning services that bring your outdoor structures back to the condition they should be in, using methods that protect the material and deliver results that last.
Call us today or request a quote online. We’ll handle the rest.